$0.00
The OA600 necropsy trimming table is perfect for both small and large laboratories. The table has a single sink basin and an optional perimeter rinse and hand spray rinse.
Description
• The tabletop is fabricated of 14 Ga type stainless steel finished with a #4 satin finish, with integral sinks.
• Swing spout faucets are provided with vacuum breaker and wrist blade H/C handles, commercial quality cast brass chrome plated.
• Hand Held Table Rinse / Spray which is deck mounted for convenience and are fabricated of brass chrome plated along with high pressure nylon reinforced tubing.
• Table Frame is fabricated of 1-5/8″ Diameter welded legs with adjustable bullet feet for leveling. All joints shall be welded with a continuous type fill weld for structural strength. All welds shall be brushed clean removing any burrs and heat stains caused during the welding process.
• Perforated Grid Plates: Fabricated of 16 Gauge each plate is perforated with 1/2″ perforations on 1″ centers, each grid panel is self supporting with 1/2″ recess and completely interchangeable. (4) Grid plates, all interchangeable.
• All internal Plumbing lines are factory installed and require only trade hook-up.
• All components parts are U.L. listed
