Follett Symphony Plus™ ice and water dispenser 110 FB series 90 lb capacity

Ice and water or ice-only dispenser, with 12 lb (5.4 kg) of storage and separate ice and water chutes. Environmentally responsible R404a air-cooled ice machine has 24 hour production capacity of approximately 425 lb (193.0 kg) of Chewblet compressed nugget ice at water temp of 70 F (21 C); air temp. of 50 F (10 C). Ice machine equipped with automatic self-flushing and Quiet Night sleep mode. Dispenser has automatic bin level control to start and stop ice machine. Storage area insulated with CARB compliant non-HFC foam. 8.5′ (2.6 m) cord and NEMA 5-15 90º hospital grade plug provided. NSF and ETL listed.

Description

Features:
• 90 lb (40.9 kg) ice storage capacity
• Removable air- or water-cooled ice machine with up to 425 lb (193.0 kg) daily production of Chewblet ice
• soft, chewable, compressed nugget ice is preferred over cubes and is ideal for patient care
• Quiet Night™ sleep mode turns off ice machine when idle

Designed with sanitation in mind:
• Automatic self-flushing of ice machine removes impurities
• Drain cup provides internal air gap for added protection of food zone components from drain line contaminants
• Agion® silver-based antimicrobial provides protection of key ice and water contact components
• One-hand lever or SensorSAFE infrared ice dispense
Dependable design, easy to service and clean:
• Cleaning and sanitizing of entire machine takes only 1 hour
• LED control board provides at-a-glance machine status
• Panels are easily removed for accessibility to all components
• Ice machine parts are common across all Symphony Plus dispensers
• Stainless steel evaporator and auger deliver long life
Environmentally responsible:
• Meets Consortium for Energy Efficiency Tier 2 specifications
• R404a refrigerant has zero ozone depletion potential
• Continuous ice making process uses less electricity and water
Durable, attractive dispenser:
• Stainless steel cabinet with accent trim
• Poly drain pan, grille and dispenser lid are corrosion-resistant
Easy installation:
• Comes fully assembled and installs with three easy connections – electric, water and drain


• Ice storage capacity: 90 lb (40.9 kg)
• W1 Width, top: 25.00" (63.5 cm)
• W2 Width, bottom: 26.25" (66.7 cm)
• D1 Depth, top: 28.25" (71.8 cm)
• D2 Depth, drain pan: 7.00" (17.8 cm)
• D3 Depth, bottom: 29.44" (74.8 cm)
• H1 Height: 68.12" (173.0 cm)
• H2 Dispense height clearance: 7.75" (19.68 cm)
• Ventilation clearance: air-cooled models only 4.00" (10.16 cm) rear
• Service clearance: 12.00" (30.5 cm) top
• C1 115 V/60/1 electrical: 11 amps, 0.8 kW, 7' (2.1 m) cord, NEMA 5-15 90º hospital-grade plug
• C2 Potable water inlet, ice machine and dispenser: 3/8" FPT
• C3 Drain, dispenser: 3/4" MPT Water-cooled ice machine connections
• C4 condenser inlet: 3/8" FPT
• C5 condenser drain: 3/8" FPT
• C6 Ice machine drain: 3/4" MPT
• Air temperature: 50 -100 F (10 - 38 C)
• Water temperature: 45 - 90 F (7 - 32 C)
• Potable water pressure: 10 - 70 psi (69 - 483 kpa)
• Condenser water pressure: 10 - 125 psi (69-861 kpa)
• Heat rejection: air-cooled models – 5000 BTU/hr, water-cooled models – 1400 BTU/hr to air, 3600 BTU/hr to water
• Water flow requirement for water-cooled models: 0.25 gpm (0.95 lpm) at 50 F (10 C), 0.5 gpm (1.90 lpm) at 70 F (21 C), 1.25 gpm (4.73 lpm) at 90 F (32 C)
• Approximate net weight: 253 lb (115 kg)
• Approximate ship weight: 290 lb (132 kg) NOTE: For indoor use only
3 years parts and labor, 5 years compressor parts